Implementing the Cisco NCS540 Series Routers (NCS540HWE) - Topología de laboratorio

 

Topología de laboratorio

  • Discovery 1: Configure and verify NTP on Cisco IOS XR routers
  • Discovery 2: Create and configure a local repository, and install a Cisco IOS XR software package
  • Discovery 3: Retrieve and edit device configuration by using model-drive programmability
  • Discovery 4: Configure and verify model-driven telemetry
  • Discovery 5: Learn how to configure and verify IPv4 and IPv6 filtering on a Cisco IOS XR router
  • Discovery 6: Configure Unicast Reverse Path Forwarding (uRPF) on a Cisco IOS XR router
  • Discovery 7: Configure management plane protection (MPP) on a Cisco IOS XR router
  • Discovery 8: Configure and verify IGP segment routing
  • Discovery 9: Configure and verify the operation of SR TI-LFA fast reroute using the IS-IS routing protocol
  • Discovery 10: Configure and verify the operation of SR TI-LFA using OSPF routing protocol
  • Discovery 11: Implement SR-TE within the network topology using OSPF
  • Discovery 12: Implement SR-TE within the network topology using IS-IS
  • Discovery 13: Configure and verify SR-TE for high-bandwidth and low latency traffic using ODN, network slicing, and Flexible algorithm
  • Discovery 14: Deploy MP-BGP as the PE-CE routing protocol in the VPNs of a service provider end customer
  • Discovery 15: Deploy various routing options to establish a PE-to-CE relationship
  • Discovery 16: Configure and verify EVPN VPWS, and enable BGP to exchange routes between PE routers